High frequency vacuum wood/timber/lumber dryer equipment adopts high frequency drying, inside and outside of wood timber is heated at same time, uniform heating, high speed drying, short time and good quality, which can keep the timber nature color, meanwhile, the timber is aerated under the vacuum environment, non-cracking, especially applied for the thick and hard precious wood, wet wood.
Three main parts of High frequency vacuum wood dryer
Vacuum square stainless oven
Technical data of GZ-6.0-DX
High Frequency Vacuum Wood Drying Oven
Type of work:
high-frequency heating, vacuum dehydration
6.6 cubic meter
Total input power:
All kinds of wood
Depending on the technology needs
Max Length of Wood:
1.It is new drying method. (Dielectric heating)
Steam and normal vacuum dryer (hot plate) is conductive heating. They dry the wood little by little from outside to inside.
High frequency is dielectric heating. HF wave can penetrate the thick wood and dry it uniformly. Even the core of wood temperature is heater than surface.
Vacuum condition: It is minus pressure, safe.
The wood moisture can vaporized in low temperature.
Then vapor will be pump out automatically. So HF vacuum dryer is faster, more uniform, no bending and no crack caused by non-uniform.
2. No need boiler; No need hot plate (no hot water)
The power supply of HF vacuum dryer is electricity. It does not need boiler, save the human resource and protect the Environment.
3. Worm killing.
High frequency can kill the worm and bacteria. It does not need special chemical treatment.
4. Applications of DXHF vacuum dryer
Normal solid wood;
Rose wood,hard wood, verawood,red sandalwood, large square beams etc.;
Thin plane cutting board,peeling veneer floor
5. Advantages of High frequency vacuum wood dryer
1)Heating fast and uniformly, fast drying(:more than10 times faster than conventional steam dryer);
2)Saving labor, cost and drying time;
3)Full-automatic, easy to control and operate; flexible and simple;
4)High outturn percentage, no crack, no deformation;
6)New square design tank increase the availability of the inner space;
7)Bacteria and worm killing, high outturn percentage ;
8)Drying apply for all kinds of wood
Packaging & Shipping
Sample: we can provide free brochures to customers.
Warrenty: all kinds of machines can be ensured 1 year.
Customer service: If there were something wrong during this warrenty, our engineer would be available to oversea to repair it freely.
Shijiazhuang Development Zone Daxin Electronic Science And Technology Co., Ltd. is a professional firm specialized in the production of High-frequency Medium Heating Equipment, which is widely used in the areas of furniture, wood drying, Integrated Wood, scientific wood and bent wood.
Products made in our firm sell well in over twenty provinces and autonomous regions in China. Our products can sufficiently improve your production efficiency in the production areas of bent wood, musical instrument, model airplane and ship, scientific wood and Laminated Board. In 2003, our firm successfully passed ISO9001 certification, which has greatly improved the general management level.
Our company will continue as always to stick to our principle of "credibility, confidence and trustworthiness" and provide satisfactory services for all customers.
United States, Uganda, Thailand, Vietnam, New Zealand, Japan, Bulgaria, Iran, Indonesia, Tanzania etc.