Standard export packing, plastic and foam, fixed by wood pallet, shipped in container by sea
High frequency vacuum dryer (timber dryer)
1. It is new drying method. (Dielectric heating) Steam and normal vacuum dryer(hot plate) is conductive heating. They dry the wood little by little from outside to inside. High frequency is dielectric heating. HF wave can penetrate the thick wood And dry it uniformly. Even the core of wood temperature is heater than surface. Vacuum condition: It is minus pressure, safe. The wood moisture can vaporized in low temperature. Then vapor will be pump out automatically. So HF vacuum dryer is faster, more uniform, no bending and no crack caused by non-uniform. 2. No need boiler; No need hot plate (no hot water) The power supply of HF vacuum dryer is electricity. It does not need boiler, save the human resource and protect the Environment. 3. Worm killing. High frequency can kill the worm and bacteria. It does not need special chemical treatment.
HF machine power
Wood maximum length
It does not require heat conduction, inside and outside of wood timber is heated at same
During the heating process, there is staged temperature difference between inside and
outside of wood timber, this will speed up the water movement from inside wood to outside
wood (the principle is to the convencontrary tional heating).
Good quality of
There will be no cracking, bending and color change by taking control of heating speed,
relative vacuum degree & condensing rate.
High frequency vacuum drying can realize not only cold drying but hot drying, help to
eliminate stress, solidify resin.
This applies to dry all kinds of wood.
Square designed drying box supplies more space utilization.
It is suitable for different shaped wood.
Fast temperature raise and higher space utilization takes lower cost than traditional ways.
This machine does not pollute the environment.
UA Unattended Automatic drying process, very easy to handle.
This is the core of this machine, all procedures and main technology are inside, including PLC, electric valve etc. Advanced component guarantees customer usage, easy to see and operate.
Advanced and high strength press system to avoid any bend and crack, and to ensure the drying quality.
Packaging & Shipping
Packing & Delivery:
Packing: standard export packing with plastic film in one container or as customers' request.
Delivery: within 30 days after receipt of prepayment
Our engineer will install the machine for the buyers
Instruction Book is inside with the machine.
China Haibo International Co.,Ltd Email: haibo3(at) vhaibo.com Tel: +86-0311-89836929 Fax:+86-0311-86682328 Skype: vhaibo3 Add:No.313 Heping Road,Shijiazhuang Hebei,China 050000